# An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction

_Computer Modeling in Engineering & Sciences · Yuwei Liu, Yuhui Liu, Zhengkun Cheng et al. · 2026_

Canonical: https://diginpl.com/books/paper-cmes-2026-087312
Last updated: 2026-10-04

## Quick facts

- **Author:** Yuwei Liu; Yuhui Liu; Zhengkun Cheng; Yang Zhao; Lulu Nie ([Crossref](https://doi.org/10.32604/cmes.2026.087312))
- **Published:** 2026 ([Crossref](https://doi.org/10.32604/cmes.2026.087312))
- **Publisher:** Tech Science Press ([Crossref](https://doi.org/10.32604/cmes.2026.087312))
- **Journal:** Computer Modeling in Engineering & Sciences ([Crossref](https://doi.org/10.32604/cmes.2026.087312))
- **DOI:** 10.32604/cmes.2026.087312 ([Crossref](https://doi.org/10.32604/cmes.2026.087312))

## Questions

**Who wrote An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction?**  
An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction was written by Yuwei Liu, Yuhui Liu, Zhengkun Cheng, Yang Zhao.

**When was An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction first published?**  
An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction was first published in 2026.

## Sources

- [Publisher record (DOI, via Crossref)](https://doi.org/10.32604/cmes.2026.087312)

## Licence and attribution

Open-access publication. Read it free at the publisher: https://doi.org/10.32604/cmes.2026.087312.

## Cite this page

"An Integrated Design Framework for Additively Manufactured Multi-Axial Parts: Topology Optimization, Multibody Dynamic Load Extraction and Surface-Topography-Based Fatigue Correction". DigiNepal. Last updated 4 October 2026. https://diginpl.com/books/paper-cmes-2026-087312. Retrieved 14 November 2026.